Integrated pressurized solar water heater

Villa use, High pressure 0.6 Mpa Solar Keymark, SABS certified 175L, 3 people for shower Electrical heater assistant, Features Specifications: Integrative pressurized Solar Water Heater

Pressure: pressurized

Certificate: ISO9001, ISO14001:2004, CCC, CE,SABS

Feature
1)Mains pressure solar water heaters with copper coil heat exchanging
2)Heat exchanging takes place instantly whenever hot water is being used
3)Advantage:simple system structure
4)Output pressurized hot water
5)test pressure: 0.6MPa
The Detail of material
Outer Tank: Color Sheet ,0.4mm
Inner Tank: SUS 304-2B Stainless Steel 0.5mm
Insulation: ployurethane foam(62.5mm)
Vacuum tube: borosilicate glass 3.3
Absorption coating: AL-N-Cu-SS 3 targets
Stand: Aluminum alloy/galvanized sheet,  angle: 25 or 45 degrees

 

Our pressure solar water heater can get 0.6Mpa water when you take shower.

All the parts are the same to our non pressure solar water heater, except adding a heat exchanger copper coil inside tank, we use water directly from copper coil as a closed loop to get the pressure the same as tap water.

This type, we must install feeding tank, the principle is not the same as non pressure Solar water heater, it just makes up some water into tank in case evaporating from vent. Because we don't use water from tank, the tank just works as warmer to heat coil. So after days or years, water will be less and less, auto feeding tank will start to work and feed water into big tank.

The advantage of this type is: it can bear 0.6Mpa pressure, so you can enjoy nice shower, also you can connect this type to your electrical boiler or gas heater directly.

For our tanks with 60C water, put into icehouse -20C for 12 hours, reduce 3-4C.

Principal of pressure solar water heater

Integrated pressurized solar water heater